Secondary Shredder Type NZS 1000
Secondary Shredder Type NZS 1000 is intended for secondary shredding of wood wastes after pre-shredder
VB 750 into technological splint. Resulting splint fraction size is approx. 10-40 mm and can be used
as extra raw material by woodworking industry or thermally utilized.
Resulting fraction size of splint depends on size of openings of installed screen. Fractional separation
of resulting splint can be achieved through installation of system of screens and sieves.
Metal detector is set in shredder, it is also possibe to mount magnet separator for detection
of metal parts in material.
Field of Application:
|
|
Advantages:
- High performance: from 20 about 50 tonn/hour (depending on sizes and type of crush material)
- Possibility of transporting
- Hydraulically assembling conveyer
- System of emergency shutdown
- Remote control
- It is easy to replace threadbare working knives
- the Insignificant consumption of energy
- the Insignificant selection to the noise and dust
| Model | NZS 1000 D | NZS 1000 E |
| Type | stationary | stationary |
| Occasion | diesel engine | electric motor |
| Power, kW | 400 (250 kW) | 180 kW |
| Productivity | 20-50 | 20-50 |
| Size of material grind down, mm | 150-500 | 150-500 |
| Size of material grind up, mm | 10-40 | 10-40 |
| Rotor rotation frequency, min -1 | 1300 | 1300 |
| Height of the troop landing of material grind up, mm | 3400 | 3400 |
| Width in case of transporting, mm | 2800 | 2800 |
| Height in case of transporting, mm | 2900 | 2900 |
| Length in case of transporting, mm | 6800 | 6800 |
| Width during exploitation, mm | 6500 | 6500 |
| Height during exploitation, mm | 4200 | 4200 |
| Consumable power, kW/hour | 5 kW/hour | 5 kW/hour |
| Weight, tons | 15 | 15 |
|
Additional equipment:
«OLNOVA» offers:
|
